Default values or actual data?
Without actual emission data, your EU importer must use default values that get a growing mark-up every year. This tool compares the certificate cost of both scenarios.
Pick a product and press Calculate
You get the certificate cost with EU default values for the selected year and, if you enter your installation's actual emission value, the cost with actual data and the difference. The chart shows how it develops until 2034.
Datasets used · 5 official datasets · sources and notes
cbam-default-values-iron-steel-tr@1.0.0verified400 entriesDefinitive-period CBAM default values (tCO2e per tonne of good, WITHOUT mark-up) for iron and steel goods from Türkiye (TR) and from the fallback table 'Other countries and territories' (countryIso2 = 'XX'). Annex I of Implementing Regulation (EU) 2025/2621 as replaced by Implementing Regulation (EU) 2026/1740 (applies retroactively from 1 January 2026).
- Commission Implementing Regulation (EU) 2026/1740 correcting Implementing Regulation (EU) 2025/2621 (Annexes I and IV replaced) · Annex I (replacing Annex I of 2025/2621): tables 'Türkiye' and 'Other countries and territories', section 'Iron and steel'; recital (10) and opening paragraphs on mark-ups · Accessed: 22 Oct 2026
- Commission Implementing Regulation (EU) 2025/2621 (default values) · Article 1(1), (2), (5); Article 2 (applies from 1 January 2026; to be revised in 2027 at the latest) · Accessed: 22 Oct 2026
Values are the official table values WITHOUT mark-up. Per Reg. 2026/1740 Annex I opening paragraphs, the CBAM Registry applies the mark-up to the 'total emissions' column (see dataset cbam-default-value-markups). Direct/indirect columns are 'provided for information only' (Reg. 2026/1740 recital 10).
For in-scope iron and steel goods listed in Annex II of Reg. 2023/956 (direct emissions only) the indirect column is 'N/A' in the official table and stored as null; seeTotal equals seeDirect. Only CN 2601 12 00 (sintered ore) has an indirect value.
Where the TR table shows '–' (no value) the official rule is to use the 'Other countries and territories' value (countryIso2 'XX'); findDefaultValue() applies this fallback. Affected TR codes: 7202 19, 7202 49, 7203.
Rows given in the official table at HS-heading level (4 or 6 digits) apply to all 8-digit CN codes under that heading; rows marked 'see below' in the official table are omitted because values are given at sub-heading level.
cbamBenchmarkRoute is the production-route indicator that determines the default CBAM benchmark for the free allocation adjustment (Reg. 2025/2620 Annex point 5): C = carbon steel BF/BOF, F = low-alloy steel BF/BOF, 'C/F' as printed for 7205. For TR, carbon-steel defaults point to route C (BF/BOF) even for goods typically made via EAF.
Default values must be reviewed by December 2027 at the latest (Reg. 2025/2547 Art. 11(5); Reg. 2025/2621 recital 11) - re-check before every reporting year.
Extraction: parsed programmatically from the Official Journal XHTML (Publications Office Cellar) on 2026-10-22; TR numbers were unchanged by Reg. 2026/1740 vs. the original 2025/2621 table (only route indicators changed for 7225 19 90, 7226 19 80, 7306 30 18, 7318 12 10, 7318 14 10).
cbam-default-value-markups@1.0.0verified13 entriesMark-up applied to definitive-period default values (total emissions column) per calendar year and sector. A year entry applies to that year and all later years until the next entry ('2028 and onwards').
- Commission Implementing Regulation (EU) 2026/1740 correcting Implementing Regulation (EU) 2025/2621 (Annexes I and IV replaced) · Annex I, opening paragraphs: 'For goods in the cement, iron and steel, aluminium and hydrogen sectors, the mark-up shall be 10 % for the year 2026, 20 % for the year 2027 and 30 % for the year 2028 and onwards. For goods in the fertiliser sector, the mark-up shall be 1 % for the year 2026 and onwards.' · Accessed: 22 Oct 2026
- Commission Implementing Regulation (EU) 2025/2621 (default values) · Recitals (4)-(6) (rationale and phase-in of the mark-up) · Accessed: 22 Oct 2026
Mark-up is applied to the 'total emissions' default value: DV_with_markup = DV_total × (1 + markup) (Reg. 2026/1740 Annex I opening paragraph; recital 10). The CBAM Registry performs this calculation; replicate it without intermediate rounding.
Lookup rule: use the entry with the greatest year <= requested year for the sector. No mark-up applies before 2026 (transitional period) and electricity has no mark-up in Annex I.
Mark-ups and default values are to be revised by December 2027 at the latest.
cbam-obligation-phase-in@1.0.0verified9 entriesCBAM factor (Directive 2003/87/EC Art. 10a(1a)) per year and the derived headline obligation share = 1 - CBAM factor, plus the cross-sectoral correction factor (CSCF) where determined. These feed the free allocation adjustment (FAA) of Reg. 2025/2620; they are NOT a multiplier on embedded emissions.
- Directive (EU) 2023/959 amending Directive 2003/87/EC (EU ETS), Article 1 point (14) inserting Article 10a(1a) · Article 10a(1a), second subparagraph of Directive 2003/87/EC: 97,5 % (2026), 95 % (2027), 90 % (2028), 77,5 % (2029), 51,5 % (2030), 39 % (2031), 26,5 % (2032), 14 % (2033); from 2034 no CBAM factor · Accessed: 22 Oct 2026
- Commission Implementing Decision (EU) 2026/1862 (cross-sectoral correction factor 2026-2030) · Article 1: CSCF = 100 % for each year 2026-2030 · Accessed: 22 Oct 2026
- Commission Implementing Regulation (EU) 2025/2620 (free allocation adjustment, CBAM benchmarks) · Annex point 2 Eq. 1 (FAA_g = SEFA_g,y × M_g); point 3.1 Eq. 2 (SFAProc = CBAM_y × CSCF_y × BM*); point 4 Eq. 6 (SEFA = CBAM_y × CSCF_y × BM_g for default values) · Accessed: 22 Oct 2026
- European Commission, Guidance No. 4 - Calculation of the free allocation adjustment (14 August 2026) · Table 2-1 (CBAM factor and preliminary CSCF values) · Accessed: 22 Oct 2026
- Proposal COM(2026) 616 amending Directive 2003/87/EC (ETS review, 17 July 2026) - NOT ADOPTED · Proposed new CBAM factors (not law): 91,5 % (2028), 81 % (2029), 59 % (2030), 48 % (2031), 37,5 % (2032), 27 % (2033), 15 % (2034-2037), 0 % from 2038; proposed to apply from 30 September 2027 · Accessed: 22 Oct 2026
obligationShare (1 - CBAM factor) is a headline indicator only. The legal certificate count is: certificates = embedded emissions - FAA - carbon price paid deduction, with FAA = CBAM factor × CSCF × CBAM benchmark × mass (Reg. 2025/2620 Annex points 2-4). Because the benchmark is not equal to the good's embedded emissions, net obligation / embedded emissions != obligationShare in general. Use dataset cbam-benchmarks-iron-steel for the real calculation.
CSCF is 1.0 for 2026-2030 (Decision 2026/1862). CSCF for 2031+ is not yet determined (null).
PENDING CHANGE: Commission proposal COM(2026) 616 (17 July 2026) would slow the phase-out: CBAM factor 91,5 % (2028), 81 % (2029), 59 % (2030), 48 % (2031), 37,5 % (2032), 27 % (2033), 15 % (2034-2037), 0 % from 2038. Not adopted as of 2026-10-22; values here reflect the law in force.
Proposed (not law) CBAM factors per year for scenario modelling: {"2026": 0.975, "2027": 0.95, "2028": 0.915, "2029": 0.81, "2030": 0.59, "2031": 0.48, "2032": 0.375, "2033": 0.27, "2034": 0.15}
cbam-cn-codes-iron-steel@1.0.0verified44 entriesCBAM Annex I iron and steel CN codes (prefixes: all 8-digit CN codes starting with the given digits are covered) mapped to aggregated goods categories, with whether indirect emissions count in the definitive period.
- Regulation (EU) 2023/956 (CBAM Regulation), consolidated version 2025-10-20 · Annex I (goods list, iron and steel) and Annex II (goods for which only direct emissions are taken into account); Article 7(1) · Accessed: 22 Oct 2026
- Commission Implementing Regulation (EU) 2025/2547 (methods for the calculation of embedded emissions) · Annex I point 2, Table 1 (mapping of CN codes to aggregated goods categories); Article 3(2); Annex I point 3.1 · Accessed: 22 Oct 2026
- European Commission, Guidance No. 5d - Sector-specific guidance on iron and steel (14 August 2026) · Section 2.2.1 and 3.1.1 ('for the iron and steel sector indirect emissions must be reported only for the aggregated good category sintered ore') · Accessed: 22 Oct 2026
- Regulation (EU) 2025/2083 (CBAM Omnibus simplification) · Article 1 (amendments to Annexes I and II: only kaolinic clay and electricity changed - iron and steel list unchanged) · Accessed: 22 Oct 2026
Excluded from chapter 72 scope (Annex I of Reg. 2023/956 'Except'): 7202 2 ferro-silicon, 7202 30 00, 7202 50 00, 7202 70 00, 7202 80 00, 7202 91 00, 7202 92 00, 7202 93 00, 7202 99 (10, 30, 80) and 7204 ferrous waste and scrap. Scrap therefore carries zero embedded emissions as an input.
Some 7205 goods may fall under the 'Pig iron' category instead of 'Iron or steel products' (Reg. 2025/2547 Annex I Table 1).
Crude steel category includes only primary hot-rolling / rough forging to 7207, 7218, 7224 semi-finished products; all other rolling and forging belongs to 'Iron or steel products' (Reg. 2025/2547 Annex I point 3.15.1).
indirectCountsForObligation=false means indirect emissions are outside the system boundary of the good itself. Indirect emissions of precursors NOT listed in Annex II (i.e. sintered ore) are carried into complex goods (Reg. 2025/2547 Annex I point 3.1, last paragraph).
Proposed downstream extension (COM(2025) 989, under trilogue) would add further CN codes; not reflected here.
cbam-benchmarks-iron-steel@1.0.0verified2210 entriesCBAM benchmarks for iron and steel CN codes (tCO2e per tonne of good) used for the free allocation adjustment. Column A = BM* process-level benchmark (actual data, Eq. 2); Column B = default CBAM benchmark BM_g including precursors (default values, Eq. 6).
- Commission Implementing Regulation (EU) 2025/2620 (free allocation adjustment, CBAM benchmarks) · Annex point 5.3 (CBAM benchmark values), point 5.1 (selection rules with default values), point 5.2.3 (steel type definitions) · Accessed: 22 Oct 2026
- European Commission, Guidance No. 4 - Calculation of the free allocation adjustment (14 August 2026) · Section 2 (explanation of Column A/B and year indicators) · Accessed: 22 Oct 2026
route codes: C = carbon steel BF/BOF, D = carbon steel DRI/EAF, E = carbon steel scrap/EAF, F/G/H = low-alloy steel BF/BOF, DRI/EAF, scrap/EAF, J = high-alloy steel (EAF); null = independent of route.
productionYears: '2026-2027' = indicator (1), '2028-2030' = indicator (2) in the official table (process-emission factor change from 0,97 to 0,91 under Delegated Reg. 2019/331 Art. 16); null = valid for all years 2026-2030.
When default values are used, Column B must be selected with the production route indicated for the country of origin in Annex I of Reg. 2025/2621 (as corrected by 2026/1740) - for Türkiye carbon steel this is route C (BF/BOF). Where several alloy grades are listed, the highest value for the production year is used (Reg. 2025/2620 Annex point 5.1).
Benchmarks apply to the 2026-2030 allocation period. A separate benchmark revision proposal (July 2026) is pending and could change values.